MiniWarden Simple Mode Video

See how you can set up a MiniWarden in under 5 minutes to control the chlorine and pH in your pool or spa.

Continue Reading →

What’s New For 2018

We have been busy working to enhance our products and user experience. Check out what’s new by downloading our new catalog.

Continue Reading →

New Flyers

   

Continue Reading →

2018 is the year pool automation catches up

Swimming pool chemical automation has not changed much in 20 years. Smarter, simpler, compliant chemical automation is here in 11 days.

Continue Reading →

New MiniWarden Simple Mode

We have been listening to our customers and have added a simple programming mode to the MiniWarden. Operators now have the option to choose the simple or advanced mode. The advanced mode is our regular programming. The simple mode just requires a few simple choices to be made at setup and it will take over…

Continue Reading →

ORP Setpoints

It is not uncommon for users of ORP controllers to be uncertain how to determine ORP set points. Here is a simple way of determining where to start. Check chlorine, pH, alkalinity and cyanuric acid levels and adjust to desired levels. When your water is at the level you want and note the ORP reading…

Continue Reading →

Title 22 Swimming Pool

Title 22 swimming pool is here in California and after a long, drawn out process, we are finding many health departments are starting to write citations for public pools and spas for not having the daily records for Free chlorine, pH and Temperature. Pool operators are starting to get approval from owners Title 22 chemical…

Continue Reading →

ORP – pH Probe Retrofit

We now offer BNC to BNC cables to allow you to use our ORP & pH probes or sensors with other controllers. They come in 2′ & 10′ lengths. Link to document below. probe retrofit

Continue Reading →

Value Based Chemical Automation

Since I started dealing with chemical automation in 1991, I have seen just about every manufacturer out there. Some good, some bad and some marginal. The one thing I found was the really expensive ones typically worked the best. The really cheap ones didn’t work so well and part of that, I’m sure was the…

Continue Reading →

Do my sensors need to be replaced?

A call came in form a user yesterday asking if he should purchase test buffers, solutions and a signal generator. Personally, I tried these in the mid 1990’s and found it to be a waste of time and money. The MiniWarden and PoolWarden have a built in diagnostic feature for sensor calibration. This will indicate…

Continue Reading →

Page 1 of 2